|
ok i will,
ok the supplys youl need.
1. a small bottle
2 a large bottle
3. a straight bowl peice(can be metal , glass ect.)
4. tubing(used for connecting the two bottles,so make sure its what you wan't
5. hot glue gun
okay now your ready( these steps are in genral, you need to use your imagination to embelish alittle bit,
1. take small bottle, make a hole in the cap, insert bowl peice and stem, make sure uit goes almost all the way down
2. okay, now connect the tubing on the small bottle at the top, make sure its at an angle, use glue gun to seal any leaks
3.now is the easy part, take the big bottle and make a hole where you would usually to make a regular bong, insert the other end of tubing, and agian seal any leaks with glue gun
4.make a carb where ever you want, make sure it high enough so no water gets to it,
5.make sure your system is air tight
6.once again these are very general directions, use your imagination, for design, and tools, and if you have no idea where to start, just fuck around with different bong making techniques,
ps. a sotering iron may help , of course i did without!
and if you have any other sweet ideas please post.
- ross the boss
|