I found a site that showed me how to make a flamethrower, but i was wondering is there a way to make one out of household stuff
If not ill just make this one http://mirror.linnwood.org/flamethrower/

........ half that stuff you could probably find in your house and the other stuff you could go to wal*mart or home depot for

60 bucks. Something for putting shingles on roofs. Its a flamethrower.

with the super soaker flamethrower is there a way to keep to flow going without pumping the gun

yah using a CO2 injection to create pressure. wtf do you think the pump is for you idiot you have to have pressure.... and if you can't figure a CO2 contraption out yourself then you have no business making a flame thrower

use one of the big c02 canisters like they have on paintball guns and put a regulator on it just make a hole in the side of the tank and use a couple of o-rings and melt the edges of the o-ring to the side of the tank with a soldering iron then cover the area that the c02 line goes into the tank and the entire o-ringand the area around the o-ring evenly with a genorus amount of hotglue or something to occlude any air from escaping turn the regulator on and as the level of fuel in the tank goes down more compresed gas enters keeping a steady stream of fuel

ok never mind i actualy looked at how the guy put the thing together now i under stand what hes trying to do i thought he was actually useing a super soaker
i did that once and ended up burning my self pretty bad...but super soakers do work nice for mixing industrial bleach and some oxyclean and a little ammonia with some viniger and spraying the stray dogs with it or you can do a drive by on the lady next door while shes sun bathing