how to make acetone peroxide? its driving me nuts cuz i have no idea how to get my hands on this stuff

use the search function and/or google

utfse.....

I think this is correct.......

To a 500-mL beaker add 50 mL of acetone, then stir in 30 mL of 30% hydrogen peroxide. Place the beaker in a salt-ice bath and cool it to 5° C. After cooling, slowly add 3 mL of 75% sulfuric acid drop by drop with an eye dropper. Stir the mixture continuously while adding the acid, keep the temperature between 5° C to 10° C; stop adding acid if the temperature gets to high. It is very important that you moderate the reaction, high temperatures will lower your yield and cause the formation of the less useful dicyclo isomer. After adding all the acid, continue stirring for 5 minutes. Keep the mixture in the bath for 1 to 3 hours, or even up to 24 hours. After sitting, a white precipitate should have formed. Filter the mixture to collect the crystals, then wash them with 300-500 mL of water. Allow the crystals to dry before using, keep them damp if storing. For increased purity, add the precipitate to ethyl ether and let it dissolve. Place the ethyl ether solution in a separatory funnel and wash by shaking with three portions of cold water. Add the ethyl ether solution to a beaker and heat it on a steam bath to evaporate the ethyl ether. It should take about 3 hours to dry. You will need a graduated cylinder for measuring liquids, a stirring rod or magnetic stirrer for mixing, and a thermometer to monitor the temperature.


...)/\(
<Deo>
...)\/(

Correct, yes, but it makes WAYYYYYY too much for a first timer to try and deal with.

yea thx but i kinda want something on a low scale...

just divide all the volumes by 10.