tear gas

[twenglish1]

will this work i need some tear gas and i found this but i don't want to make it untill anyone can confirm if it works or not

The method of making tear gas is so simple that anyone can do it. The two
things to
remember are care and caution. You will need a certain amount of
equipment but, you can find
them in any hobbie shop, or home chemical supplier.
If you don’t already own a gask mask, go
out and get one. They are sold at any
Army-Nazy stores for under 10 bux.

Materials Needed
—————-

1. Ring Stand 14. Rubber Tubing
2.
Alcohol Lamp 15. Glass Tubing
3. Flask (300-ml) 16. Rubber Stopper
4. Clamp 17.
Collecting Bottle
5. Rubber Stopper 18. Glass Tubing
6. Glass Tubing 19. Rubber
Tubing
7. Clamp Holder 20. Glass Tubing
8. Rubber Tubing 21. Rubber Tubing
9.
Condenser 22. Air Trap Bottle
10. Rubber Tubing 23. Glass Tubing
11. Ring Stand 24.
Rubber Tubing
12. Clamp and Clamp 25. Glass Tubing
Holder 26. Beaker (300-ml)
13.
Rubber Tubing

Method to step up
equipment
—————————

1. Metal base ring stands (No. 1 & 11)
are placed on working surface.

2. Clamp and clamp holder (No. 4 & 7) are placed
onto ring stand (No. 1).

3. Clamp and clamp holder (No. 12) are placed on ring stand
(No. 11).

4. Generating Flask (No. 3) is placed in clamp (No. 4).

5. Two
pieces of rubber tubing (No. 10 & 13) are connected to condenser
(No. 9).

6.
Condenser (No. 9) is placed into clamp (No. 12).

7. Segment of glass tubing (No. 6) is
placed in rubber stopper (No. 5).

8. Segments of glass tubing (No. 15 & 18) are put
into rubber storrer
(No. 16).

9. Segments of glass tubing (No. 20 & 23) are
put into rubber stopper
(No. 21).

10. Rubber stopper (No. 5) is put into the
mouth of the generating flask
(No. 3).

11. Rubber stopper (No. 16) is put into
mouth of collecting bottle (No. 17).

12. Rubber stopper (No. 21) is put into mouth of
air trap bottle (No. 22).

13. Connect glass tubgin (No. 6) with condenser (No. 9) and
with rubber
tubing (No. 8).

14. Connect condenser (No. 9) with glass tubing (No.
5) and with rubber
tubing (No. 14).

15. Connect glass tubing (No. 18) with glass
tubing (No. 20) and rubber
tubing (No. 19).

16. Connect glass tubing (No. 23)
with glass tubing (No. 24) and with rubber
tubing (No. 24)

17. Connect rubber
tubing (No. 10) to a faucet.

18. Put end of rubber tubing (No. 10) into a sink or
drain.

19. Fill beaker (No. 26) three-quarters full of water, and place glass

tubing (No. 25) in the water.

20. Turn on water to rubber tubing. (No. 13).
/> 21. Light wick on alcohol heater (No. 2) and place under generating flask
(No. 3).

Method For Preparing Tear Gas:
——————————

1. Work in a garage, or outside if possible - not in the
kitchen.

2. Mix ten parts of glycerine with two parts of sodium bisulfate, in

flask (No. 3), and heat. Do not fill more than one-third of flask,
as mixture froths when
heated. When the frothing begins, adjust heat.

3. As soon as you see no more tear gas
being generated, and solids
begginging to be formed in the generating flask (No. 3), or a
brown
residue in the tube (No. 6), remove the heat source, ‘With your gas
mask on’, and
pour out the residue in flask. You must pour this outside.
‘Do not pour down sink or
toilet.’

4. Remove collecting jar (No. 17) and stopper it QUICKLY. What you have

collected here is tear gas.

5. Do not attempt to make more than three ounces at one
time.

6. Make sure all joints are tight.



- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

The best method for putting tear gas into operation is to place it under pressure in a glass vial or
bottle. Then throw the bottle at the target you have in mind. The glass will break on contact (NOOO
SHIT) and allow the tear gas to escape. Other successful methods have been proven, including
compressing in an atomizer, aerosol can, or seltzer bottles.

[deathlord888]

heating glycerin sounds sketchy to me
i would not trust a guy who spells navy nazy and bucks bux...

[twenglish1]

ok thanks whats wrong with heating glycerin just wondering

[deathlord888]

it is used in TNT
and is really really sensitive

[twenglish1]

isn't that nitroglycerin?

[deathlord888]

LMFAO
ya ya it is
im tired and still i bit high/drunk
wow

[twenglish1]

haha its ok man i understand, have fun

[FireTech93]

it is used in TNT
and is really really sensitive

glycerine isnt sensitive and isnt used in tnt, toluene is used in tnt "tri nitro toluene"

sorry just realised you were drunk/high or whatever

[Ninjaofdeth]

thats the shittiest organization of a procedure ever. which means it was probably in two columns, and you prolly got it from the jolly rogers anarchist cookbook

if the author tells you to buy an old russian gask mask at a surplus store and expect it to work...dont use this procedure. i have a gas mask from a surplus store, but numerous sources tell me that they do almost nothing

if you want an OK gas mask you will need to spend at least 200 usd

[GREAT THIEF]

http://www.approvedgasmasks.com/ such as from this site

[twenglish1]

yah i was going to make it but i just reallized i need a gas mask and i don't have the right equipment and don't have the money for it, and i didn't copy it from the jolly rogers anarchist cookbook, i found it on a website but it probably did come from it

[Maggotsfriend]

Well when I've produced glycerol/glycerin from fat as a by product the method is through boiling, filtering and cooling. Boiling just don't got to high with the temperature boil not burn.

[FireTech93]

is making your own glycerine any cheaper then just buying it? and is it worth the time?

[Maggotsfriend]

Its cheaper than buying it from health stores I mean hell cheaper just think of how much fat is lol. It also leaves no questions or trails.

[Obscurum14]

Leaves no questions or trails, if you cleaned whatever you used to produce the glycerin up properly, and everything else you were sing to make the gas.

If the cops somehow connected you to it being used and found that set-up in your garage or whatever you would be more than a little busted....

[twenglish1]

im not going to worry about it if i do make this i have done way worse stuff(illegal) and you were saying when boiling it don't get it to hot, i wasn't worried about it catching on fire, i have delt with some pretty nasty chemical fires, i was woried about any toxic fumes that would be created